♠ 丹耀-首頁 > ACE > Ace 高精密穩速器&阻尼器/Speed Feed controls > Ace DVC & HBD70 系列 外部調整 油壓阻尼器

台灣總代理 : 丹耀貿易有限公司

ACE Controls Inc.

DVC-32 & DVC- 2/4/6   HBD-70 雙向可調式 油壓速度控制器

ACE DVC-32&DVC-2/4/6油壓速度阻尼器是設計來控制壓縮和伸出雙向的移動速度
,並有獨立的調整鈕來控制壓縮和伸出的速度。

 

這可靠的DVC雙向油壓速度阻尼器,是設計用來解決自動控制上壓縮和伸出速度阻尼的問題,它能有效控制移動速度的快慢需要,調整速度的旋鈕可以很簡單的操作。

 

特徵包括:可調式或固定式,單向或雙向控制及高負載的架構。

 

應用範圍:自動選放裝置、工具裝修、蓋子、鋸子、切削機、鑽孔機、移動負載及工具裝修備品。

 

技術資料:
最高操作溫度:66℃。
操作液體:40℃ (ATF)。
材料:黑色電鍍、鋁制本體。堅固鉻黃電鍍、鋼制活塞軸心、鍍鋅及鋼制末端設置。
特殊訂購:特製油及外部潤飾。單方向阻尼(逆向自由流)
安全停止:在設計行程結束前要能提供1~1.5mm的機械停止,否則DVC會故障。

 

◎ 嚴禁軸心上有焊屑、異物或用夾鉗破壞軸心表面光滑精度,被破壞的精度軸心會無法正常回歸,也會直接傷害軸心密封圈造成密封圈、軸心和前蓋軸承故障,無法正常回歸。

 

型號中EU代號是在歐盟地區銷售,歐盟以外地區都沒有EU代號,有EU和沒有EU代號,產品外觀、尺寸和功能都是一樣,沒有任何差異

Hydraulic Dampers  DVC-32

Individual speed adjustment in both directions

 

Adjustable, Without Free Travel
Compression and extension force 42 N to 2,000 N
Stroke 50 mm to 150 mm

 

Can be regulated separately in any stroke position: The hydraulic dampers of the product family DVC-32 are the first dampers to have the ability to have the in and out speeds adjusted independently from the outside and therefore more precisely. With their individual adjustment segments for the push and pull direction as well as the double-sided action, these are suitable as safety or control elements.

The great number of mounting accessories makes assembly of these hydraulic dampers by ACE easier and allows these maintenance-free, ready-to-install and self-contained systems universally applicable. Qualitatively high grade, and at the same time simple to use; one of their uses is to absorb swinging loads.

These machine elements are used, for one, in the automotive sector and industrial applications as well as in mechanical engineering and the electronics industry.

 

TECHNICAL DATA

 

Compression and extension force 42 N to 2,000 N

Stroke 50 mm to 150 mm

Outer body diameter Ø 32 mm

Piston rod diameter Ø 8 mm

Lifetime Approx. 10,000 m

Operating temperature range 0 °C to 65 °C

Adjustment Steplessly adjustable

Positive stop External positive stops 1 mm to 1.5 mm before the end of stroke provided by the customer.

Damping medium Automatic Transmission Fluid (ATF)

Material Outer body: coated aluminium; Piston rod: hard chrome plated steel; End fittings: zinc plated steel

Mounting in any position

Application field cylinder speed controls, absorption control, finishing and processing centres.

 

NOTE

Increased break-away force if unit has not moved for some time. Damping force can be adjusted after installation.

 

END FITTINGS

They are interchangeable and if necessary must be positively secured by the customer to prevent unscrewing.

 

ON REQUEST

Special oils, other special options and special accessories are available on request.

2D & 3D CAD  請  email: info@danyao-ltd.com 告知我們您要的產品型號和配件,將會在最快的時間給閣下

HBD-50 / 70 / 85 阻尼器 雙向外部可調式 速度控制器

    ACE HBD-50 / 70 / 85  液壓阻尼器在前後都設計有阻尼力的調整環,可以很方便在外部直接調整壓入和伸出的阻尼力達到客戶所要的速度。

 

阻尼力最高從100N~50,000N推進力跟行程的長短有相對的關係,這阻尼器是可以理想的控制擺動運動或體育設備,健身器材和理療機速度控制。如果您需要穩定的高阻尼力來控制您所設計的設備速度,HBD可以輕鬆的安裝在許多不同類型的應用上。

 

 

技術資料和注意事項

 

正確使用:在使用壓入或伸出行程1~1.5mm以前停止,否則產品很容易故障。
材質:活塞桿鍍硬鉻鋼,本體黑色塗層鋼。
注意:如果產品在段時間沒有使用內部密封可能會變硬,將導致增加磨擦力,必須更大的推力才能推動軸心,這點請要注意。
安裝:在任何方向角度沒有限制,但注意配件必須鎖緊確保沒有鬆動。
工作溫度範圍:0℃~65℃。
最高使用速度:0.5m/s (秒)
▲ 請不可以在軸心行走時轉動調整環,這會造成調整環故障
▲ 嚴禁軸心上有焊屑、異物或用夾鉗破壞軸心表面光滑精度,被破壞的精度軸心會無法正常回歸,也會直接傷害軸心密封圈造成密封圈、軸心和前蓋軸承故障,無法正常回歸。
▲ 注意安裝時的偏心角度。

Hydraulic Dampers  HBD-50 to HBD-85

Regulation at the highest level

 

Adjustable, Without Free Travel
Compression and extension force 100 N to 50,000 N
Stroke 50 mm to 700 mm

 

Motion control in both directions: The hydraulic dampers of the product family HBD can be adjusted independently in both the push and pull direction. These maintenance-free, ready-to-install and closed systems leave no prayers unanswered as far as the setting of retraction and extension speeds are concerned. In addition each damper works without any free travel therefore the flow of oil can be regulated exactly via the two precision metering orifices.

Adjustment can be made once installed and even when moving through stroke. The coated body and hard-chromed piston rods stand for quality and long service life. The variety of mounting accessories makes assembly easy and the high-end hydraulic dampers universally usable.

HBD hydraulic dampers are used in the automotive, in industry, mechanical engineering and medical technology.

 

TECHNICAL DATA

 

Compression and extension force 100 N to 50,000 N

Stroke 50 mm to 700 mm

Outer body diameter Ø 50 mm to Ø 85 mm

Piston rod diameter Ø 10 mm to Ø 20 mm

Lifetime Approx. 10,000 m

Operating temperature range 0 °C to 65 °C

Adjustment Steplessly adjustable

Positive stop External positive stops 1 mm to 3 mm before the end of stroke provided by the customer.

Damping medium hydraulic oil

Material Outer body: coated steel; Piston rod: hard chrome plated steel; End fittings: zinc plated steel

Mounting in any position

Application field sports equipment, rehabilitation technology, conveyor technology.

 

NOTE

Increased break-away force if unit has not moved for some time. One locknut included.

 

END FITTINGS

They are interchangeable and if necessary must be positively secured by the customer to prevent unscrewing.

 

ON REQUEST

Special oils, other special options and special accessories are available on request.

新 產 品

德國工業用鎖定式氮氣棒Lockable Gas spring阻尼棒Dampers、氮氣棒&穩速控制阻尼棒創新設計專家。

無磨擦  膜片氣缸

最低動作壓力 : 0.015bar

無油式真空泵&壓縮空壓機

壓力表隱藏在
減壓閥調整環上方內