台灣總代理 : 丹耀貿易有限公司

ACE Controls Inc.

ACE Controls Industrial Shock Absorbers
迷你&小型 MA30M‧35M‧75M‧150M‧225M‧600M&900M 
多孔微調式自力補償式 工業油壓吸震器

ACE MA30M~150M是單孔調整,MA225M~900M是多孔微調式吸震器,如果你較偏好調整式的方便,那MA系列是您最好的選擇。

 

MA225~900M是調整環&超鋼強精密活塞管一體,擁有獨一無二由深至淺偏心270o度的流量孔口多孔微調創新設計。軸心和活塞分離設計,降低活塞杆在吸震行程的側向力,油封保持均勻良好的密封效果,讓油封壽命更長。

 

MA900有40 mm行程設計,提供更低的反作用力吸震性能。

MA150起伏式密封膠囊(Rolling Diaphragm Seal)100%將油完全密封的設計,結合調整式性能證明ACE在這吸震器業界擁有獨特的科技技術優勢。(可直接裝入氣壓缸的末端蓋使用)

 

旋轉衝擊設計使用上經­常因過大的偏心造成吸震器故障問題,PV偏心角度轉接器能很有效的解決這問題。(請看目錄42&45頁)

 

型號中EU代號是在歐盟地區銷售,歐盟以外地區都沒有EU代號,有EU和沒有EU代號,產品外觀、尺寸和功能都是一樣,沒有任何差異

技術資料和注意事項

 

本體 Weartec Plus 標準防腐蝕處理,用侵略性的鹽噴灑測試證實比(白鐵和鍍鎳好30%,鍍硬鉻合金好67%,黑氧化好150%)。

 

◎ 油的型態 MA 30M,MA 35:ACE #5 MA 50M : CADCO X-900 MA 150M: Silicone MA 225M,600M,900M: ATF。
◎ 操作溫度: 0~ 66℃。 ◎ MA30M、35M、50M、150M可以做速度控制器運用。 (請看124~125頁)。
◎ 新的MA50M是設計來替換FA-1008VB。 ◎ New 新的PV旋轉設計用偏心角度轉接器。(請看目錄42&45頁) 
◎ 注意:MA150M 起伏式密封膠囊100%防止漏油設計,可以直接裝入在氣壓缸內使用。
◎ 調整方法:MA30M、35M、50M、150M調整針在本體後端的正中央位置(一字螺絲),MA225M、600M&900M調整鈕在本体後端(0-9刻度),出廠調整在5位置、再依設備上的 需求調整到最理想的吸震效果數字位置。(調整說明:1數字位置是最強(高)的反作用力。9數字位置是最弱(低)的反作用力)。
◎ 固定吸震器鐵板強度:Reaction Force(Q)總合反作用力x1.5倍。 (ACE中文電腦運算選型軟件中)
◎ 嚴禁軸心上有焊屑、異物或用夾鉗破壞軸心表面光滑精度,被破壞的精度軸心會無法正常回歸,也會直接傷害軸心密封圈造成密封圈、軸心和前蓋軸承故障,無法正常回歸。
◎ 嚴禁在本體上油漆,為了讓吸震器有更好的散熱效果 。

 

 

如何最正確的計算和選擇 ACE 工業油壓吸震器

手機耐摔測試機台

MA150~925M用新的PV偏心角度轉接器改善了舊的缺點設計﹐並且增加了防污環境的設計運用﹐解決使用環境有污染的塵﹑屑、纖維塵、金屬顆粒、切削液體、腐蝕性氣體...等問題

2D & 3D CAD  請email: info@danyao-ltd.com

告知我們您要的產品型號和配件,將會在最快的時間給閣下

Miniature Shock Absorbers  MA30 to MA900

Stepless adjustment

 

Adjustable
Energy capacity 3.5 Nm/Cycle to 100 Nm/Cycle
Stroke 8 mm to 40 mm

 

The miniature shock absorbers from the MA30 to MA900 product family can be adjusted and precisely adapted to your requirements. For example, the MA150 displays the rolling diaphragm technology from the MC150 to MC600 family and offers all of the advantages of this technology, such as use in pressure chambers. Thanks to long strokes (including 40 mm on the MA900) lower reaction forces result, which provide a soft damping characteristic.

All variations of these units are maintenance-free, ready-to-install machine elements and have an integrated positive stop. They provide the best service where application data changes, where the calculation parameters are not clear or where maximum flexibility in the possible usage is required.

The adjustable miniature shock absorbers from ACE can be used to meet precisly the customer's application and are therefore found everywhere in mechanical engineering and many other applications.

 

TECHNICAL DATA

 

Energy capacity 3.5 Nm/Cycle to 100 Nm/Cycle

Stroke 8 mm to 40 mm

Impact velocity range 0.15 m/s to 4.5 m/s. Other speeds on request.

Operating temperature range 0 °C to 66 °C

 

Mechanical Stop: Integral mechanical stop built into front of units. MA 150 designed with internal positive stop, 0.20 (5 mm) rod extension at end of stroke with no button model.


Oil type:
MA 30M, MA 35: ACE #5
MA 50M: CADCO X-900
MA 150: Silicone
MA 225, 600, 900: ATF

 

Materials: Steel body with Weartec Plus finish. MA 30M has black oxide finish. Hardened stainless steel piston rod.

 

Adjustment: On models MA 30M, MA 35, MA 50M and MA 150:by turning the adjustment screw at rear. On the larger sizes: by turning the adjustment knob against the scale marked 0 to 9. After installation, cycle the machine a few times and turn the adjustment knob until optimum deceleration is achieved (i.e.smooth deceleration throughout stroke).

 

Hard impact at start of stroke-turn adjuster toward 9.


Hard set-down at end of stroke-turn adjuster toward 0.


Technical data applies to standard and metric threaded models.


Maximum side load depends on application. For additional information contact ACE Controls’ Applications Department.

 

MA 150 models may be mounted into pressure chambers of pneumatic actuators.


Lock nut included with each shock absorber.


MA 30, MA 35 and MA 150 models can be utilized as velocity controls or timers.

 

Application field linear slides, pneumatic cylinders, swivel units, handling modules, machines and plants, finishing and processing centres, automatic machinery, tool machines, locking systems

 

NOTE

If precise end position datum is required consider use of the stop collar type AH. Shock absorber is preset at delivery in a neutral position between hard and soft.

SAFETY INFORMATION

External materials in the surrounding area can attack the seal components and lead to a shorter service life. Please contact ACE for appropriate solution suggestions. Do not paint the shock absorbers due to heat emission.

ON REQUEST

Nickel-plated or other special options available to special order. Models without rod end button.

螺帽

安全定位套筒

鐵頭

BP消音頭

偏心角度轉接頭

通用型固定架

固定架

夾溝槽固定架

夾溝槽法蘭固定架

防塵套頭

近接開關

新 產 品

德國工業用鎖定式氮氣棒Lockable Gas spring阻尼棒Dampers、氮氣棒&穩速控制阻尼棒創新設計專家。

無磨擦  膜片氣缸

最低動作壓力 : 0.015bar

無油式真空泵&壓縮空壓機

壓力表隱藏在
減壓閥調整環上方內