♠ 丹耀-首頁 > ACE > Ace 高精密穩速器&阻尼器/Speed Feed controls > Ace MVC225M ~ 900M 系列 油壓速度控制器

台灣總代理 : 丹耀貿易有限公司

ACE Controls Inc.

MA30~150M & MVC225M~900M 油壓速度控制器

ACE MVC225~900M系列是較精巧體積的油壓速度控制器設計,有寬大可調整範圍,可有效穩定的控制速度需求,適用於低成本不需要摻雜更多昂貴的應用上。

MVC系列特徵為全螺紋本體方便固定和裝配,本體前端面有安全定位停止設計,防止破壞油壓速度控制器內部結構問題。

MA30~150和MVC是很相似的油壓速控制設置,但它們無法提供和VC系列較高精密度的速度控制應用上。

技術資料
操作溫度:0°~ 66°C。
油的型態:矽化物 Silicone。
高最衝擊速度:0.3 m/sec。
瞬間接觸衝擊動能不能超過 2Nm

 

 

型號中EU代號是在歐盟地區銷售,歐盟以外地區都沒有EU代號,有EU和沒有EU代號,產品外觀、尺寸和功能都是一樣,沒有任何差異

技術資料和注意事項

 

◎ 注意:MA150M 起伏式密封膠囊100%防止漏油設計,可以直接裝入在氣壓缸內使用。
◎ 調整方法:MA30M、35M、50M、150M調整針在本體後端的正中央位置(一字螺絲),MA225M、600M&900M調整鈕
   在本体後端(0-9刻度),出廠調整在5位置、再依設備上的 需求調整到最理想的吸震效果數字位置。
(調整說明 : 1數字位置是最強(高)的阻尼力 用力。9數字位置是最弱(低)的阻尼力)。
◎ 螺帽、安全定位套筒、固定架、近接開關請看目錄37~41頁。
◎ New 新的PV迴轉偏心角度設計(請看42~45頁)。
◎ 嚴禁軸心上有焊屑、異物或用夾鉗破壞軸心表面光滑精度,被破壞的精度軸心會無法正常回歸,也會直接傷害軸心密封圈造成密封圈、軸心和前蓋軸承故障,無法正常回歸。
◎ 嚴禁在本體上油漆,為了讓吸震器有更好的散熱效果 。

Hydraulic Feed Controls  FA, MA, MVC

Designed for applications with low precision requirements

 

Adjustable
Compression force 8 N to 3,500 N
Stroke 7 mm to 40 mm

 

Many application options: The hydraulic feed controls in models FA, MA and MVC are similar to that of the VC model. However, these hydraulic controls have been designed for applications that require less precision.

There are also plenty of accessories for the FA, MA and MVC models. All products are ready-to-install, maintenance-free, stable in temperature and avoids stick-slip effect. Speeds from 12 mm/min. can be driven at a low thrust force using the adjustment screw on the base of the hydraulic control.

Hydraulic feed controls with the designations FA, MA and MVC are especially used in handling modules or linear carriages and also for applications with changing usage data.

 

TECHNICAL DATA

 

Compression force 8 N to 3,500 N

Stroke 7 mm to 40 mm

Execution Thread M8 to M25

Impact velocity range At speeds of 0.3 m/s the maximum allowed energy is approx. 2 Nm. Where higher energies occur use a shock absorber for the initial impact. Avoid high impact velocities.

Adjustment Hard impact at the start of stroke, adjust the ring towards 9 or PLUS. Hard impact at the end of stroke, adjust the ring towards 0 or MINUS.

Positive stop Integrated

Damping medium oil, temperature stable

Material Outer body: nitride hardened steel; Piston rod: steel with black oxide finish or nitride hardened

Mounting in any position

Operating temperature range 0 °C to 66 °C

Application field handling modules, linear slides, automatic machinery, conveyor equipment, absorption control

 

NOTE

Damper is preset at delivery in a neutral position between hard and soft.

 

SAFETY INFORMATION

External materials in the surrounding area can attack the seal components and lead to a shorter service life. Please contact ACE for appropriate solution suggestions.

 

ON REQUEST

Nickel-plated, weartec finish (seawater resistant) or other special options available on request.

2D & 3D CAD  請  email: info@danyao-ltd.com 告知我們您要的產品型號和配件,將會在最快的時間給閣下

新 產 品

德國工業用鎖定式氮氣棒Lockable Gas spring阻尼棒Dampers、氮氣棒&穩速控制阻尼棒創新設計專家。

無磨擦  膜片氣缸

最低動作壓力 : 0.015bar

無油式真空泵&壓縮空壓機

壓力表隱藏在
減壓閥調整環上方內