♠ 丹耀-首頁 > ACE > Ace 高精密穩速器&阻尼器/Speed Feed controls > Ace VC 2515~25125系列 高精密油壓穩速器

台灣總代理 : 丹耀貿易有限公司

ACE Controls Inc.

VC2515 ~ VC25125 高精密油壓穩速控制器

ACE VC精密穩速控制器是用於精準穩定的速度控制上,當推進力壓縮軸心時,內部的液壓油會被壓縮通過一個可調整的精密計量孔口,來提供非常穩定的速度前進,速度的快慢可藉由在產品本體後端的調整鈕,可依設計上的需要速度來轉動調整鈕,達到最好的穩速效率。

 

FT全螺紋本體在安裝上和可調整速度的調整鈕變得非常簡單。

 

MA及MVC是很相似的油壓速控制設置,但它們無法提供和VC系列較高精密度的應用上。

VC精密穩速控制器提供精確的速度控制,不用維修保養、穩定的散熱讓速度不會失控。型號2515、2530、2555是起伏式密封膠囊提供100%完全密封不會漏油設計,這高精密、可調整計量系統可以提供精確的控制,如同能在最低的推進力控制在每分鐘12mm的速度。

 

應用範圍:鋸子、切削機、鑽孔機、磨碎機及用於塑膠材質、金屬、木質及玻璃工業的鑽孔機。

 

型號中EU代號是在歐盟地區銷售,歐盟以外地區都沒有EU代號,有EU和沒有EU代號,產品外觀、尺寸和功能都是一樣,沒有任何差異

技術資料和注意事項

 

◎ 溫度範圍:0°~ 60℃ 。
◎ 本體:(F)光面23.88mm和(FT)螺紋本體M25x1.5兩種本體規格提供選擇,請小心不要破壞調整鈕。
◎ 速度控制範圍:推進力在400N最低時可控制在每分鐘13mm,在3500N最高可控制在每分鐘38m。
◎ 注意:VC2515~2555是起伏式密封膠囊設計,過度的旋轉軸心會造成密封膠囊毀壞。如果在環境會接觸到石油或切削液時,請訂購特殊合成尼奧普林(Neoprene)起伏式密封膠囊或使用SP25吹氣保護套。
◎ 高最衝擊速度:0.3 m/sec,VC2515~2555瞬間接觸衝擊動能不要超過=1Nm,
                                   VC2575~25125不要超過=2Nm。
◎ 嚴禁軸心上有焊屑、異物或用夾鉗破壞軸心表面光滑精度,被破壞的精度軸心會無法正常回歸,也會直接傷害軸心密封圈造成密封圈、軸心和前蓋軸承故障,無法正常回歸。
◎ 嚴禁在本體上油漆,為了讓吸震器有更好的散熱效果 。
◎ 注意接觸時的最大偏心角度。

Hydraulic Feed Controls
VC25

For precision adjustment of feed rates

 

Adjustable
Compression force 30 N to 3,500 N
Stroke 15 mm to 125 mm

 

Precise adjustment for any type of application: Hydraulic feed controls of the product family VC are ideally suited for the precise tuning of constant feed rates. The thread of the outer body of this closed hydraulic element allows simple assembly. Designs with a smooth body can also be supplied.

As the hydraulic oil is forced out through the throttle opening, a constant feed rate is achieved on the stroke. In the models up to 55 mm stroke, the tried and tested rolling diaphragm, known from ACE shock absorbers, serves as a dynamic seal, as volume compensation of the piston rod and as a reset element.

Precision hydraulic feed controls of the product family VC are used in automotive and industrial applications as well as in automation and machine building and electronics industries.

 

TECHNICAL DATA

 

Compression force 30 N to 3,500 N

Stroke 15 mm to 125 mm

Execution F = Ø 23.8 mm without thread
FT = M25x1.5 threaded body

Piston rod diameter Ø 8 mm

Impact velocity range At speeds of 0.3 m/s the maximum allowed energy is approx. 1 Nm for units up to 55 mm stroke and approx. 2 Nm for units 75 mm to 125 mm stroke. Where higher energies occur use a shock absorber for the initial impact. Avoid high impact velocities.

Adjustment Infinitely adjustable

Positive stop External positive stops 1 mm to 1.5 mm before the end of stroke provided by the customer.

Damping medium oil, temperature stable

Material Outer body: black anodized aluminium; Piston rod: hard chrome plated steel; Accessories: steel with black oxide finish or nitride hardened

Mounting in any position

Operating temperature range 0 °C to 60 °C

Application field handling modules, linear slides, automatic machinery, conveyor equipment, absorption control.

 

NOTE

Nylon button PP600 can be fitted onto piston rod. Unit may be mounted in any position.

 

SAFETY INFORMATION

Do not rotate piston rod, if excessive rotation force is applied rolling seal may rupture. External materials in the surrounding area can attack the seal components and lead to a shorter service life. Please contact ACE for appropriate solution suggestions.

 

ON REQUEST

Special oil and other special options available on request.

2D & 3D CAD  請  email: info@danyao-ltd.com 告知我們您要的產品型號和配件,將會在最快的時間給閣下

新 產 品

德國工業用鎖定式氮氣棒Lockable Gas spring阻尼棒Dampers、氮氣棒&穩速控制阻尼棒創新設計專家。

無磨擦  膜片氣缸

最低動作壓力 : 0.015bar

無油式真空泵&壓縮空壓機

壓力表隱藏在
減壓閥調整環上方內